What is the most popular Benjamin Moore white paint?

Benjamin Moore names White Dove OC-17 as its most popular and most sampled white, prized as a soft, classic white that flatters walls, trim, and cabinets at once. Chantilly Lace OC-65 and Swiss Coffee OC-45 follow close behind for crisp and creamy looks.Popularity is a starting point, not a guarantee. The right white still depends on your light and finishes, so treat these three as a shortlist and sample them in your own space before buying.

Should I choose White Dove or Chantilly Lace?

Choose Chantilly Lace when you want a clean, almost true white with a hint of cool, especially in bright rooms or modern, cool-toned palettes. Its high LRV keeps it crisp and luminous on walls, trim, and ceilings.Choose White Dove when you want softness and warmth without going creamy. Its mid-80s LRV and gentle greige undertone make it more forgiving in average light. One caution: avoid placing White Dove right beside a stark white fixture, where it can look slightly dull.

Why does my white paint look dingy or yellow?

Usually it is the undertone meeting the light. A warm, creamy white in a low-light or north-facing room can read yellow or muddy, while a cool white in the same room can look gray. The wall is simply amplifying the undertone you did not notice on the chip.The fix is to match temperature to the space and the fixed finishes, then test a large sample on the actual wall. If a warm white reads too yellow, a cleaner white like Chantilly Lace often solves it.

What sheen should I use for white walls and trim?

For most white walls, eggshell or satin is ideal, giving a soft sheen that wipes clean. Save flat or matte for ceilings and quiet, low-traffic walls where you want surface flaws to disappear.On trim, doors, and cabinets, step up to semi-gloss for a harder, scrubbable surface. That jump in sheen also creates pleasing contrast when the trim shares the same white as the walls.

White Paint Colors | Benjamin Moore

Sort by

White paint looks simple until you tape six chips to the wall and watch them turn warm, cool, gray, or yellow under your light. Choosing the right white comes down to three things: undertone, light reflectance, and sheen. At Paint Outlets, we carry the full Benjamin Moore range of whites for walls, trim, cabinets, and exteriors, along with the guidance to match them.

2124-70 Distant Gray

2125-70 Wedding Veil

2126-70 Chalk White

2128-70 Lily White

2131-70 Gray Sky

2133-70 Tundra

2134-70 Genesis White

2135-70 Patriotic White

2137-70 White Wisp

2138-70 Gray Lake

2139-70 White Ice

2140-70 Winter White

2141-70 Vanilla Milkshake

2142-70 Icicle

2143-60 Moonlight White

2143-70 Simply White

2144-60 Cloud Nine

2144-70 Snowfall White

2145-70 Cotton Balls

2146-70 Bavarian Cream

2147-70 Alpine White

2148-60 Timid White

2148-70 Mountain Peak White

2149-70 White Chocolate

2150-70 Easter Lily

2151-70 Powder Sand

2152-70 Mayonnaise

2153-70 Ivory Tusk

2154-70 Vanilla Ice Cream

2156-70 Fine China

2157-70 Ivory Tower

2158-70 Cream Froth

2159-70 White Cloud

2160-70 Sugar Cookie

2161-70 Woodland Snow

2162-70 October Sky

2163-70 Winter Sky

2164-70 Candle White

2165-70 Butter Pecan

2166-70 Adobe White

2167-70 Summer Peach

CSP-185 Plaster of Paris®

CSP-215 Cake Batter

CSP-245 Stoneware

CSP-305 Crisp Linen

CSP-335 French Macaroon

CSP-370 Picket Fence

CSP-395 Strand of Pearls®

« Previous 1 2 3 4 Next »

Why white paint is so hard to get right

Quick Answer

For most homes, three Benjamin Moore whites cover the bases: Chantilly Lace OC-65, a crisp near-neutral white with an LRV around 90, Simply White OC-117, a brighter warm white and former Color of the Year, and White Dove OC-17, a soft warm white that is Benjamin Moore's most sampled color. Pick by undertone and your room's light, then sample before you commit.

Key Takeaways

Every white has an undertone. Warm whites lean yellow, cream, or greige, while cool whites lean blue, gray, or violet.
LRV measures how bright a white is. Chantilly Lace sits near 90, while soft whites like White Dove and Swiss Coffee fall into the low-to-mid 80s.
Match the white to your light: a warmer white balances cool north light, where bright whites can look stark or yellow.
Use flat on ceilings, matte or eggshell on walls, and satin or semi-gloss on trim, doors, and cabinets.

No white is truly white. Every shade carries a faint undertone that stays invisible on the chip but takes over once it covers a wall and meets your light and fixtures. That is why two whites that look identical in the store can read completely differently at home.

A second factor is light reflectance value, or LRV, the 0 to 100 scale architects and designers rely on to gauge how much light a color reflects, and Benjamin Moore publishes an LRV for every color it makes. Brighter whites near an LRV of 90 feel crisp and luminous, while softer whites in the low 80s read warmer and more grounded.

Warm white versus cool white

The first decision is temperature. Warm whites contain traces of yellow, cream, or greige and make a room feel cozy and inviting. They flatter wood floors, brass, and the warmer end of your neutral paint colors. Cool whites carry blue, gray, or violet and read crisp, clean, and modern.

Let the fixed elements decide. Warm wood, beige stone, and antique brass call for a warm white so nothing looks dingy beside it. Cool marble, polished chrome, and the lighter tones in your gray paint colors are happier with a cooler white that keeps the palette sharp rather than muddy.

The Benjamin Moore whites worth knowing

Chantilly Lace OC-65 is Benjamin Moore's go-to clean white. Its published LRV of about 90 and near-absent undertone make it read as a true, slightly cool white that works beautifully as a whole-home trim and ceiling color. Because pigment is minimal, plan on a quality primer for even coverage.

Simply White OC-117, named Benjamin Moore's Color of the Year for 2016, is the brightest of the warm whites at a published LRV near 90. Its gentle yellow undertone gives walls a sunny glow in good light, though it can look a little stark in cold north exposures.

According to Benjamin Moore, White Dove OC-17 is its single most sampled paint color, and it earns that status. Softer and faintly greige in the mid-80s, it brings warmth without turning creamy, which makes it forgiving across a wide range of rooms and lighting.

For more warmth, Swiss Coffee OC-45 sits in the low 80s with a creamy, faintly green-yellow cast that pairs well with natural materials. On the cool side, Decorator's White OC-149 leans blue-gray for modern rooms, while Cloud White OC-130 is a soft, barely-taupe white long favored for cabinets and millwork. Compare these and more in the full white paint colors collection.

Matching white paint to your light

Light changes a white more than any swatch can show. North-facing rooms get cool, indirect light that can turn bright whites sterile and pull out blue, so a warmer white usually keeps the space balanced. This is why a soft warm white is such a safe choice for north-facing bedroom paint colors and home offices.

South-facing rooms flood with warm light that energizes crisp whites and can push creamy whites toward yellow. East and west rooms shift through the day, warm at sunrise or sunset and cooler in between. Always brush a large swatch on more than one wall and check it morning, noon, and night before deciding.

Choosing white for walls, trim, cabinets, and ceilings

A foolproof approach is to wrap a single white around the room and let sheen do the work: flat on the ceiling, matte or eggshell on the walls, and satin or semi-gloss on the interior trim colors and doors. The shifting finish creates quiet contrast with no undertone clash.

If you prefer crisp definition, keep soft white walls and switch to a brighter, cooler white on the trim. In busy spaces such as living rooms and hallways, eggshell or satin wipes down easily. For cabinets and trim that take real abuse, Benjamin Moore ADVANCE, a waterborne alkyd, levels brush marks into a smooth, furniture-grade finish.

Using white paint outdoors

Sunlight outdoors is far stronger than anything inside, so a bright interior white can look harsh and glaring on siding. Warmer, slightly deeper whites tend to wear better on a facade, holding a soft, natural look from morning to evening without going gray.

Treat the body, trim, and front door as a set, balancing a white body with a crisper white or a deeper accent on the trim. Browse favorite exterior home colors for white siding and trim combinations suited to your home and the light around it.

Order Benjamin Moore Paint from Paint Outlets

Paint Outlets is an authorized Benjamin Moore retailer with three Michigan locations and more than seventy years of combined experience, and our team color-matches and samples these whites for customers. We ship nationwide to the 48 states, so order samples, grab a fan deck, or call us to talk undertones and light, and ask about bulk and contractor pricing at extension 2.

Frequently Asked Questions

Benjamin Moore names White Dove OC-17 as its most popular and most sampled white, prized as a soft, classic white that flatters walls, trim, and cabinets at once. Chantilly Lace OC-65 and Swiss Coffee OC-45 follow close behind for crisp and creamy looks.
Popularity is a starting point, not a guarantee. The right white still depends on your light and finishes, so treat these three as a shortlist and sample them in your own space before buying.

Choose Chantilly Lace when you want a clean, almost true white with a hint of cool, especially in bright rooms or modern, cool-toned palettes. Its high LRV keeps it crisp and luminous on walls, trim, and ceilings.
Choose White Dove when you want softness and warmth without going creamy. Its mid-80s LRV and gentle greige undertone make it more forgiving in average light. One caution: avoid placing White Dove right beside a stark white fixture, where it can look slightly dull.

Usually it is the undertone meeting the light. A warm, creamy white in a low-light or north-facing room can read yellow or muddy, while a cool white in the same room can look gray. The wall is simply amplifying the undertone you did not notice on the chip.
The fix is to match temperature to the space and the fixed finishes, then test a large sample on the actual wall. If a warm white reads too yellow, a cleaner white like Chantilly Lace often solves it.

For most white walls, eggshell or satin is ideal, giving a soft sheen that wipes clean. Save flat or matte for ceilings and quiet, low-traffic walls where you want surface flaws to disappear.
On trim, doors, and cabinets, step up to semi-gloss for a harder, scrubbable surface. That jump in sheen also creates pleasing contrast when the trim shares the same white as the walls.