ADVANCE® Waterborne Interior Alkyd Paint - Satin Finish 792
In stock & ready today
Choose options

Ships nationwide
Secure checkout · 100% satisfaction guarantee
Benjamin Moore Command HP3920 is a single component waterborne acrylic urethane enamel in satin for facility and property maintenance on interior and exterior surfaces. From the HP High Performance line, this fast drying urethane paint dries to touch in 15 minutes and bonds to metal, concrete, tile, and wood. Sold in quarts, gallons, and 5-gallon pails, in store or online.
Benjamin Moore Command paint is a waterborne acrylic urethane whose urethane resin sets it apart from a standard acrylic enamel like DTM Acrylic Enamel HP3320. Urethane adds abrasion and UV resistance to create a harder, more durable film that holds its satin sheen on doors and floors. That durability is why a painting contractor specs Ben Moore Command over a basic enamel.
The film stays flexible, so it resists cracks and peeling, and its tack-free formula keeps fresh doors and cabinets from sticking. Excellent adhesion across mixed materials is why pros pick Ben Moore Command over other high performance enamels.
At 77°F and 50% relative humidity, Benjamin Moore Command satin paint dries to touch in 15 minutes and accepts another coat in one hour. Vertical surfaces are back in use in about an hour, and floors take foot and forklift traffic after 24 hours.
Those fast drying properties let crews paint high use areas like stairwells and corridor doors without closing a building or trading durability for speed. This waterborne acrylic urethane also applies at surface, air, and material temperatures as low as 35°F, extending the exterior season, a real game changer for project schedules on commercial sites.
Premixed colors are White (01), Bronzetone (62), and Black (80), and Gennex bases tint thousands of Benjamin Moore paint colors in store. Compare Command with our HP urethanes.
Benjamin Moore built Command satin for handrails, metal railings, metal doors, safety markers, trim, block walls, and cabinets. This waterborne acrylic urethane bonds to galvanized steel, aluminum, concrete, masonry, wood, drywall, plaster, vinyl, PVC, and ceramic tile, often making it the only paint a crew needs, from interior break room furniture to exterior awnings.
As a floor paint on concrete floors in warehouses and loading docks, Ben Moore Command stays durable under heavy foot traffic. Benjamin Moore advises against hot tire areas like parking garages, where epoxy coatings fit better, and immersion service. Pair it with our industrial paint and coatings and general contractor products to stock the job site.
Surface preparation decides how this urethane paint performs. Each surface must be clean, dry, and free of grease, dirt, oil, and wax; Benjamin Moore recommends HP6000 Oil & Grease Emulsifier. Remove loose paint and rust, fill holes, and finish with light sanding. Degloss any shiny surface to ensure proper adhesion.
Prime new ferrous metal with Acrylic Metal Primer HP1100. Galvanized, aluminum, and other non-ferrous metal take HP1100, Waterborne Bonding Primer HP1750, or a first coat of Ben Moore Command direct. Bare wood takes an acrylic primer or a direct coat; drywall and cured plaster need sanding plus acrylic priming.
Benjamin Moore calls for a 30-day cure on concrete and masonry. Acid etch slick concrete, then apply a masonry sealer, or block filler on rough block, before the first finish coat. Scuff sand glazed tile and old alkyd enamels, and use HP1750 for proper bonding where sanding can't degloss the tile surface.
Benjamin Moore Command hides less than a premium wall paint, so don't count on one coat over a color change. Plan on two coats for most work, plus a third coat when brushing and rolling light over dark. Following the manufacturer's instructions on film thickness gives the most durable, smooth result.
Use a premium nylon/polyester brush and quality roller, working from unpainted areas into wet paint. Because Ben Moore Command dries quickly, keep a wet edge; each coat levels out to create a smooth, professional finish on cabinets and furniture. To spray, run 1,500 to 2,500 PSI with a 0.013 to 0.017 tip, testing a small area first. No need to thin it.
HP3920 is the satin version, a softer sheen that hides minor surface flaws better than Command Gloss HP3900. Choose gloss for safety markers and satin for doors, trim, corridor walls, and cabinets. Both Benjamin Moore Command sheens, satin and gloss, share the same dry times, adhesion, and durability.
Prefer an alkyd paint? Alkyd Urethane Semi-Gloss HP2210 offers oil-like leveling with urethane hardness but needs solvent cleanup. For mixed substrates and speed, Benjamin Moore Command satin is the more versatile waterborne acrylic urethane for interior and exterior work.
Shop this Benjamin Moore Command waterborne acrylic urethane at Paint Outlets, an authorized Benjamin Moore dealer with shipping to the 48 contiguous states. Every store offers curbside pickup, and any painting contractor ordering 50 gallons or more earns additional discounts. Call 248-598-0311 ext. 5 for bulk pricing on your next project.
By the Paint Outlets Team.
Paint Outlets
In stock & ready today
Choose optionsIn stock & ready today
Choose optionsIn stock & ready today
Choose optionsIn stock & ready today
Choose optionsGood to know
Chat with a human
Our paint experts will help you pick the right product, match your color, and handle bulk pricing — no guesswork.
Plan your project
Tell us the area and coats — we'll size the order so you buy once and never run short mid-wall.