Romabio MASONARY FLAT- US Version

Masonry Flat is a high-performing, mineral masonry paint made for extreme durability for the interior or exterior. A beautiful, permanent flat finish that is naturally mold resistant, toxin-free, and environmentally friendly. Mineral paints are breathable and calcify to the masonry surface allowing moisture to release creating a longer-lasting finish with low maintenance.

• Ideal for brick, stone, or stucco
• Will not chip, peel or flake off
• 20 Year warranty, if applied as directed
• 2 coats, no additional primer for unpainted, absorbent masonry
• Pressure wash and paint on the same day as masonry surfaces must be dampened

SURFACE TYPE

Interior/Exterior Absorbent, Unpainted Brick & Stone (No Primer needed); Unabsorbent Or Glossy Brick/Hardie Board/Cementitious Board/Concrete/CMU Block/ Portland or Gypsum Stucco (MicroGrip Primer)

COVERAGE

APPLICATION REQUIREMENTS

• PREP Prepare and clean surface. Dampen masonry surface.
• DILUTION Product must be diluted prior to application
• COATS 2 Coats
• TOOLS Apply with a brush, roller, or professional-grade airless sprayer (tip of 0.019″ – 0.021″) or an HVLP spray gun (tip: 1.4mm-1.5mm)
• DRY TIME 4-8 Hours
• TOUCH UPS Very flat finish. Easy and can be done at any time.

RECOMMENDED DILUTION*